The HP ZBook fix in Omarchy is a good reminder that slow resume usually leaves fingerprints in the logs. Here’s how to find them.
1. See which sleep mode you’re using
cat /sys/power/mem_sleep
The one in brackets is active. [s2idle] is modern standby; deep is classic S3 if your firmware offers it.
2. Do a controlled test
sudo rtcwake -m mem -s 60
That sleeps for 60 seconds and wakes on its own, so you can time it.
3. Read the kernel log from that cycle
journalctl -k -b | grep -Ei 'PM: |suspend|resume|IO_PAGE_FAULT|timeout|nvme'
Look at the timestamps between PM: suspend exit and the lines before it to see where the time went. Long gaps next to a device (often NVMe, Wi-Fi or USB) point at the culprit. IO_PAGE_FAULT lines point at the IOMMU, like the HP case.
4. Try one change at a time
Update the BIOS first. Then test kernel parameters one at a time from your bootloader config and re-run the rtcwake test. Write down what you changed so you can undo it.
God Bless, and Use the Source!