With the AMDXDNA driver hitting 1.0 and local AI apps starting to use the NPU, here’s a quick read-only way to see whether your Ryzen AI laptop’s NPU is actually working on Linux.
1. Is the hardware there?
lspci -nn | grep -i -E 'signal processing|neural'
AMD’s NPU usually shows up as a signal processing controller. No line, no NPU (or it’s disabled in firmware).
2. Is the driver loaded?
uname -r
lsmod | grep amdxdna
modinfo amdxdna | grep -i -E '^(version|filename)'
The amdxdna driver has been in the mainline kernel since 6.14, so a current kernel should have it.
3. Is there a device node?
ls -l /dev/accel/
A working NPU shows up as an accel device, like accel0. Make sure your user has permission to use it; your local AI app’s docs will say which group it needs.
4. Did firmware load?
sudo dmesg | grep -i amdxdna
Errors here usually mean missing or old NPU firmware. Update your linux-firmware package, reboot, and check again.
Once all four check out, the NPU is ready for software that knows how to use it.
God Bless, and Use the Source!